Cycle Pump with Right Angled Connector Chuck

ROLL OVER ON ABOVE IMAGE TO VIEW IT

Cycle Pump with Right Angled Connector Chuck

In stock

Be the first to review this product

SKU: MM-OP-15-40160

The CyclePump uses a powerful 12 volt electric motor and a high quality metal compressor assembly that's specially hardened for motorcycle applications. US Patent 29/557,770.

To run the CyclePump connect it to any 12 volt power source (like your bike's electrical accessory socket or the terminals of a battery). Attach the air hose to the tire, flip the switch, and begin filling your tire.

The CyclePump is proudly made in the USA by Best Rest Products. They don't use fragile plastic components that can easily break when you drop it on the ground. They've armoured the switch and other components so the unit is virtually indestructible. It's ready for an around-the-world expedition.

Tire inflation time varies by tire size, air density, voltage, laden or unladen tire load, and other factors, but as a practical rule the CyclePump will fill a front tire in 2-3 minutes and a rear tire in 3-5 minutes. Topping off a few extra pounds takes less than a minute.

Technical specs: The aluminium case is less than 2" high x 4" wide x 6" long. With all the wires and power connectors and hose the storage pouch dimensions are 2x6x9". Weight is 36 ounces.


Cycle Pump with Right Angled Connector Chuck
Size – H 50mm x W 102mm x L 153mm
Size in pouch with power wires – H 50mm x W 102mm x L 228mm
Weight – 964 grams
Power Draw - approximately 10 amps
Air Hose Length – 457mm with right angled connector chuck
Power Cord – 2.44 metres
Power plugs fit BMW, cigarette and 2-prong SAE connectors
Also supplied with Battery alligator clips which attach to any 12 volt battery
Right Angled connector chuck
£138.99
   

   Pin it

Details

The CyclePump uses a powerful 12 volt electric motor and a high quality metal compressor assembly that's specially hardened for motorcycle applications. US Patent 29/557,770. To run the CyclePump connect it to any 12 volt power source (like your bike's electrical accessory socket or the terminals of a battery). Attach the air hose to the tire, flip the switch, and begin filling your tire. The CyclePump is proudly made in the USA by Best Rest Products. They don't use fragile plastic components that can easily break when you drop it on the ground. They've armoured the switch and other components so the unit is virtually indestructible. It's ready for an around-the-world expedition. Tire inflation time varies by tire size, air density, voltage, laden or unladen tire load, and other factors, but as a practical rule the CyclePump will fill a front tire in 2-3 minutes and a rear tire in 3-5 minutes. Topping off a few extra pounds takes less than a minute. Technical specs: The aluminium case is less than 2" high x 4" wide x 6" long. With all the wires and power connectors and hose the storage pouch dimensions are 2x6x9". Weight is 36 ounces.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.